Quitanieves inalámbrico 2X2 de 40 V máx.* de 21", sin escobillas (2 baterías de 5 Ah y cargador incluidos)

The STX2-M1 is best suited for paved residential driveways, sidewalks and patios. Its 21-inch clearing width covers more ground per pass than a powered snow shovel, while its lightweight cordless design is easier to handle and store than most gas-powered machines. For very long driveways or extended heavy-snow cleanup, an additional pair of batteries may be helpful.

The STX2-M1 has a maximum intake depth of 12 inches, but it performs most efficiently when fresh snow is cleared before it becomes deeply packed or frozen. For snow approaching 12 inches, wet snow or a dense pile left by a street plow, use slower passes and remove the snow in layers rather than trying to clear the full depth at once.

Yes, the 1,800W brushless motor and variable-speed auger can handle moderate wet snow and slush. Select the higher auger speed and move at a steady pace for demanding conditions. Wet, compacted or icy snow requires more battery power and may reduce both runtime and throwing distance compared with light, dry snow.

The owner’s manual lists a maximum runtime of approximately 15 minutes with the two included 5.0Ah batteries. Actual runtime depends heavily on snow depth, moisture, temperature, auger speed and walking pace. Some owners report longer operation in lighter snow, while deep or wet snow can drain the batteries more quickly. Both batteries must be installed to operate the machine.

No. The STX2-M1 is a push-style single-stage snow thrower. At 36 pounds without batteries, it is substantially lighter and easier to maneuver than many gas-powered machines, and the 7-inch wheels help it roll across paved surfaces. However, the operator must still provide forward movement, especially through deep or compacted snow.

Yes. The chute rotates electronically up to 180 degrees using a control near the handle, allowing you to redirect snow without stopping to adjust the chute by hand. The machine can throw snow up to 33 feet in ideal conditions. Actual distance will vary with snow density, moisture, auger speed and discharge angle.

The kit includes the STX2-M1 snow thrower, two 20V Max 5.0Ah lithium-ion batteries and a 6A dual-port charger. The batteries are part of the SENIX X2 20V Max platform and can power other compatible SENIX X2 tools. The snow thrower uses both batteries together to produce 40V Max power.

The STX2-M1 is intended primarily for paved driveways, sidewalks and patios. Avoid using it over loose gravel because the auger may pick up and throw stones. It requires no gasoline or oil changes. After use, remove both batteries, wait for the auger to stop completely, clear accumulated snow safely, wipe the machine dry and store it indoors. Never use your hands to clear a blocked chute.