Cortadora de césped manual SENIX de 21" y 140 cc con motor Briggs & Stratton de 4 tiempos, con sistema 3 en 1 de triturado, ensacado y descarga lateral.

Make sure the blade control is engaged and all spark plugs are connected to the spark boot. Use only clean gasoline that’s less than a month old and contains less than 10% ethanol. We recommend using ethanol-free fuel. If the engine hasn’t been primed, do so by consulting the “Operation” section of your product guide. The engine could be flooded. Try waiting a few minutes, then restarting. If problems persist, there may be a blocked fuel line or faulty spark plug. Contact customer support or consult a professional mechanic about replacing parts.

Marks sure your spark plug boot isn’t loose and check to make sure all spark plugs are connected and tight. Run out the existing fuel and replace with new fuel. Use only clean gasoline that’s less than a month old and contains less than 10% ethanol. We recommend using ethanol-free fuel. Clear the vent in the gas cap and check your air cleaner. For cleaning instructions, refer to the “Air Cleaner” section of your product manual.

Your oil level may be too low. Check and refill if needed using 10w-30 or SAE-30. Your air flow may also be restricted. Clean the area around and on top of the engine.

The gap between your spark plugs may be too tight. You may need to adjust.

You may have faulty or fouled sparks plugs. Replace spark plugs and check spark plug gap. If it’s too wide, try adjusting. Also, check your air cleaner. Consult the “Air Cleaner” section of your product manual.

Check your cutting blade. If it is loose, tighten the blade and adaptor. If your blade is bent, it will need to be replaced.